Quantcast

Loading, Please Wait

240V AC is used for 60Hz North American panels only.

240V AC for 60Hz North American panels will require detailed bussing notes to define L1 & L2 load groups.

I understand, continue
Not what I want, go back

230V AC is used for 50Hz European panels only


I understand, continue
Not what I want, go back
notice You are currently in Trial Mode, and are not logged in. Any panel created in Trial Mode cannot be saved or submitted for quote.
Step 1

First, Define Your Panel

mm in  
Select a frame size from the drop down menu. Frame size will change the panel price.
Select the voltages required for your panel. These options can be changed as you go.
Actuator:
Step 2

Then, Add Modules

  • Click on a group below to view modules in each group.
  • Drag the module you want into the panel grid. When the square turns blue, the module will be dropped into that grid.
  • To replace a module, just drag and drop it over the module you want to replace.
120V Outlet

You must select voltage(s) for your panel before you can select modules

ACR

You must select voltage(s) for your panel before you can select modules

Battery Management

You must select voltage(s) for your panel before you can select modules

Battery Switches

You must select voltage(s) for your panel before you can select modules

Blank

You must select voltage(s) for your panel before you can select modules

Circuit Breakers

You must select voltage(s) for your panel before you can select modules

DC 12V Socket

You must select voltage(s) for your panel before you can select modules

Gauges

You must select voltage(s) for your panel before you can select modules

Metering (Analog)

You must select voltage(s) for your panel before you can select modules

Metering (Digital)

You must select voltage(s) for your panel before you can select modules

Metering (DIN)

You must select voltage(s) for your panel before you can select modules

Source Selection (Lockout Slide)

You must select voltage(s) for your panel before you can select modules

Source Selection (Rotary)

You must select voltage(s) for your panel before you can select modules

Step 3
Load Modules with Breakers & Labels
 
 

Step 4
Last, Request Your Quote


Optional Notes For:
  • Bussing/load groups
  • Distributor contact

Done

Please expect an email confirming your design was received by Blue Sea Systems. If your panel can be built per your expectations you will receive pricing from your distributor in 3 business days. For panels with a high degree of complexity more time may be required for engineering review or a BSS representative may contact you to discuss possible alternatives.

 
NoticeYou have cookies disabled.
The Panel Wizard requires cookies to provide you full functionality.
Many features of the site will not function until cookies are enabled.